Full Automatic Bridge Bevel tripod turnstile

Full Automatic Bridge Bevel tripod turnstile
1,304#stainless steel
2.50persons/min(IC Card)
3.rs485

Full Automatic Bridge Bevel  tripod turnstile

Descriptions:

the turnstile provides a basic tripod to control access smoothly and effectively by basic operation, and also prevent

 illegal in and out. The machine is well in design, rustproof, durable and can resist external destroy.
According to different machine centers, intelligent tripod turnstile can be divided into fully automatic tripod turnstile

 and semi automatic tripod turnstile. Their differences are fully automatic product can finish any work by power. The arm will 

automatically drop when it is powered off. And the arm will automatically go up when power is turned on again.
To Semi-automatic product, the arm can drop automatically when it is powered off. But when the power is turned on, 

the arm will be raised by hand. 

 

1.Technical Parameters

 

1	Power	AC220C±10V,50HZ
2	Operating Temperature	-45°C---60°C
3	Relative Humidity	≤95%, No Condensation
4	Access Width	≤700mm
5	Passing Speed	50persons/min(IC Card)
6	Motor	140W/24V
7	Motor Operation Speed	1600R/Min
8	Communication Distance	≤1200M
9	Input Connection	+12V Level Signal or Pulse Wide>100ms Pulse Signal,Current>100ms
10	Communication Connection	RS485 Communication Module Standard.
11	Material	SUS304,thickness is no less than 1.5mm
12	Running Life	5--8 Million(Continuous Opening and Closing Operation)
13	Protection Grade	IP54
14	Colour	SSB(US32D)-Stainless Steel Brushed / Powder Coating(Optional), or other Colour you like
15	Operation Place	Subway Station, Hoverport, Tourism Sports,Exhibition, Swimming Hall,Residence Area,Enterprise’s Entrance and Exit Attendance,Gateway Guard,Charge Management,Special Access Control

 

Function:

1) Single/double walkway---controlled in one direction or both

2) A valid lock action can allow one passage at one time 

3) Normally open---the machine will unlock when a valid signal is received 

4) It will lock automatically if passage through turnstile is not completed within pre-set time, the set time can be adjusted via parameter change